Mitel 3000 Installation And Maintenance Manual page 8

WARNING
This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict
accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has
been type tested and found to comply with the limits for a Class A computing device in accordance with the
specifications in Subpart J of Part 15 of FCC Rule. Operation of this equipment in a residential area may cause
unacceptable interference to radio and TV reception requiring the operator to take whatever steps are necessary
to correct the interference. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient the receiving antenna
• Relocate the CCU with respect to the receiver
• Check that the CCU and receiver are not on the same circuit; the CCU must be powered from an isolated,
dedicated AC outlet
If necessary, the user should consult the dealer or an experienced radio/television technician for
additional suggestions. The user may find the following booklet prepared by the FCC helpful: "How to
Identify and Resolve Radio-TV Interference Problems"
This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock No.
004-000-00398-5. If RFI problems persist, contact Mitel Customer Support.
3
Mitel 3000
Installation & Maintenance Manual