Wall-Mounting The Feature Phones - Mitel 3000 Installation And Maintenance Manual

Mitel 3000
Installation & Maintenance Manual

Wall-mounting the Feature Phones

The phone pedestal is inverted on the base to wall mount the phone.
Locate, drill and plug the two screw locations as shown below. The holes should be deep enough to accept a one-
inch screw. Insert the two screws leaving sufficient space to clip the base over them. Locate the phone and base
over the screws.
Feature Phone in
Wall-Mount position
Line cord rails
6 inches
Sixteen key Feature
Phone and DSS in Wall-
Mount position
30