Installation Steps - Mitel 3000 Installation And Maintenance Manual

Mitel 3000
Installation & Maintenance Manual

Installation steps

Carry out the following steps to install the system:
FIRST, read the safety and precaution information on page 6 carefully.
SECOND, mount the Main Equipment as detailed in the section starting on page 9.
THIRD, install the CO line, T1/E1 PRI Module, Expansion Modules, and Broadband Module as required.
An Expansion Module must be installed if the following is required:
•
More than 8 extensions
•
More than four CO lines
A Broadband Module must be installed if an internal LAN or connection to a DSL Line or Cable Modem is
required. It must also be fitted if IP extensions/VoIP trunks are to be provided.
A Voice Module must be installed to provide Voice Mail, Customized Courtesy Service, Directory Service or
Auto-Attendant functionality.
The Battery Back Up module and battery must be installed if battery back up is required.
FOURTH, cable the extensions to the Main Equipment and install the system Feature Phones and
standard telephones as detailed in the Cabling Section starting on page 32. This section also covers
installation of the following:
• Door Phone
• Doorstrike
• External Music-On-Hold
• Public Address
• RS232 Interface to provide Call Logging
FIFTH, cable the CO line connections as detailed in the cabling section starting on page 32.
SIXTH, Power up the system and provide customer training as detailed on page 116.
8