Page 2
Mitel 3000 Basic Installation instructions Basic Installation instructions for the Mitel 3000 This is a basic installation sheet for the Mitel 3000 system. Detailed installation instructions are supplied in the Installation Manual that is on the CD supplied with the phone system.
Page 3
Step 3 Mount the CCU on the first bracket The CCU is mounted on the bracket by sliding it on from the left-hand side. There are two marks on the right-hand side of the CCU. Line these up with the inside edge of the last flange on the bracket and slide the CCU to the right.
Page 4
Mitel 3000 Basic Installation instructions Step 5 Install any additional modules on the Backplane The Extension and Internet Router Modules are supplied in two parts: the Main Distribution Frame (MDF) and the Module itself. Install the MDF on the backplane; lock it by pushing the locking bar up as shown and then insert the module.
Page 5
Step 6 Install the CO modules and the Voice module 6A: Installing modules in the CCU CO Module 1 CO Lines 1 and 2 CO Module 2 CO Lines 3 and 4 Voice Module 6B: Installing CO Modules in the Extension module NOTE: Ensure all the locking screws are locked after the modules are installed.
Page 6
THIS DOCUMENT IS PROVIDED TO YOU FOR INFORMATIONAL PURPOSES ONLY. The information furnished in this document, believed by Mitel to be accurate as of the date of its publication, is subject to change without notice. Mitel assumes no responsibility for any errors or omissions in this document and shall have no obligation to you as a result of having made this document available to you or based upon the information it contains.