Setting Procedure To Be Taken Before Regular Operation; Setting The Date And Time; Setting The Sewing Machine Id - JUKI IP-110 Instruction Manual

2. Setting procedure to be taken before regular operation

To set data on the operaton of the producton support functon, press the Informaton swtch
the normal sewng mode to change over to the nformaton mode.

2-1. Setting the date and time

Refer to "!. 2-2 Information mode"
*
<Date and time setting screen>
1) Set the current date and tme wth Tme settng swtch 1 .
* If any date which does not exist on a calendar (such as the 31st and a leap year) is set, the relevant
date will be shown in black-and-white reverse video and the setting cannot be confirmed.
2) When Enter swtch 2 is pressed, the setting is confirmed. When Cancel swtch 3 s pressed, the
settng s cancelled and the screen s restored to the prevous one.

2-2. Setting the sewing machine ID

Refer to "!. 2-2 Information
*
<Sewing machine ID setting screen>
Clear switch 2
1) Input an eght-dgt ID of the sewng machne wth Numerc nput swtches 1 .
The sewing machine ID is used when analyzing the operation measurement data gathered from
two or more sewing machines with the SMDAA. Be sure to set a unique ID for the sewing machine
because it is necessary to associate the sewing machines installed in a sewing plant respectively
wth the operaton measurement data gathered from those machnes.
* Be sure to set the sewing machine ID without exceptions.
If the blank bar is displayed, the forbidden data alert will sound to disable confirmation.
2) When Enter swtch 3 is pressed, the setting is confirmed. When Cancel swtch 4 s pressed, the
settng s cancelled and the screen s restored to the prevous one. If Clear swtch 2 s pressed, the
sewng machne ID beng nput wll be cleared. Re-nput the sewng machne ID.
To input the sewing machine ID without fail, it is possible to set the sewing machine ID
input method to the twice input style.
Refer to "@. 6-2. (2) Production support common setting screen No. 2"
for the operating procedure to be taken until this screen is displayed.
Time setting switch 1
Time setting switch 1
mode" for the operating procedure to be taken until this screen is displayed.
Numeric input switch 1
Numeric input switch 1
– 11 –
Cancel switch 3
Enter switch 2
Cancel switch 4
Enter switch 3
under
for details.