ProductOn Support Common SettNg Screen No. 2 - JUKI IP-110 Instruction Manual

(2) Production support common setting screen No. 2
Refer to "!. 2-2 Information
*
Input the tem to be set referrng to the table gven below.
When Enter swtch 5 is pressed, the input data is confirmed. When Cancel swtch 6 s pressed, the
nput data s cancelled and the screen s restored to the prevous screen.
No. Item to be set
The number of tmes
1
of nputtng the sewng
machne ID
The number of tmes of
2
nputtng the operator ID
The number of tmes
3
of nputtng the product
number
The number of tmes of
4
nputtng the process
number
mode" for the operating procedure to be taken until this screen is displayed.
1 4
2 3
1 2 3 4
The number of tmes of nputtng the sewng machne ID for enterng the sewng
machne ID s set.
Set ths tem to the "nput twce" to prevent ncorrect nput.
Input once :
The number of tmes of nputtng the operator ID for enterng the operator ID s set.
Set ths tem to the "nput twce" to prevent ncorrect nput.
Input once :
The number of tmes of nputtng the product number for enterng the product
number s set.
Set ths tem to the "nput twce" to prevent ncorrect nput.
Input once :
The number of tmes of nputtng the process number for enterng the process
number s set.
Set ths tem to the "nput twce" to prevent ncorrect nput.
Input once :
– 19 –
Cancel switch 6
Enter switch 5
Descrpton
Input twce :
Input twce :
Input twce :
Input twce :
Intal settng : Input once
Intal settng : Input once
Intal settng : Input once
Intal settng : Input once