JUKI IP-110 Instruction Manual page 18

No. Item to be set
Working condition selector
1
swtch
Working/resting times
2
settng swtch
Daily target production
3
volume settng swtch
(2)-1. How to set the working time and resting time
Daily working time is set finely by the working time and resting time each of which can be set to three
dfferent values.
The following shows an example of the setting procedure. Input data appropriately referring to the ex-
ample.
Example) Set the following time period for working condition
Working hours : 8:00 - 17:00
Lunch break : 12:00 - 13:00
Work break s : 10:00 - 10:10, 15:00 - 15:10
<Settng procedure>
Working/resting times setting 1
Input of data on working time 1 2
On the assumption that one sewing machine is used by the operators working the
shift or for sewing two or more different sewing items, three different daily working
conditions (working hours and total production volume)
working conditions set in this step can be invoked on the production management
screen under the normal sewng mode. Ths elmnates re-settng of detaled
working conditions at the shift time or the sewing item changing.
The starting/finishing times of work and the resting time of day are set. The working
time period can be set more finely with working time and resting time each of which
can be set to three dfferent values.
Refer to the next tem "@. 2-5 (2)-1 How to set the working time and resting
*
time" for detals of settng procedure.
* The actual working time, obtained by subtracting the resting time from the length
of time elapsed from the starting to the end of daily work, is displayed.
The target production volume to be produced from the starting to the end of working
hours in a day is set.
* When the switch is pressed, the numeric input popup screen is displayed. Input
a set value n the popup screen.
8:00
– 1 –
Descrpton
.
10:00
12:00 13:00
1) Start setting the working time and
restng tme
Start inputting data on working
condton
2) Set the working time.
Select the input of working time
1 . Input of data on working
tme 1
can be set. The
15:00 17:00
.