Sewing Recorder Screen No. 2 - JUKI IP-110 Instruction Manual

3-2. Sewing recorder screen No. 2

On the sewng recorder screen No. 2, the sewng machne operaton rate and the average number of
revolutions in the pitch time section displayed on the screen No. 1 is calculated and displayed. (Sections
A and B in the figure given below) In addition, the display method employed on the sewing recorder
screen No. 1 is specified.
<Sewing recorder screen No.2>
1
2
No. Name
A Sewng machne The rate of the tme durng whch the sewng machne operates n the ptch tme shown on the
operaton-rate sewing recorder screen No. 1 is displayed.
display Upper display : Data No. 1
B Average number The average number of revolutons of the sewng machne n the sewng machne operatng
of revolutons section within the pitch time shown on the sewing recorder screen No. 1 is displayed.
display Upper display : Data No. 1
Active data Active data (data to be shifted with switch C or D, data to be additionally recorded when sewing operation
1
selector swtch
s carred out, or data whch can be cleared wth Clear swtch
Setting only data No. 1
to be actve
Producton volume The producton volume s counted up wth one tem added.
2
count-up swtch
Graph's horizontal The range of the horizontal axis (time unit in one section) of the graph shown on the sewing
3
axs range settng recorder screen No. 1 s set.
swtch Settng range : 10, 30, 0, 120, 180, 300, 00sec
Graph's The range of the vertical axis of the graph displayed on the pitch time monitor screen No. 1 is set.
4
vertcal range Setting range : auto, 1000, 2000, 3000, 4000, 5000sti/min
settng swtch In the case of "auto," the range is automatically selected to display the number of revolutions on
the vertcal axs as large as possble at all tmes.
* It should be noted, however, that the maxmum measurable number of revolutons can be ncreased to 9000
Clear swtch Data whch s set to be actve s cleared.
5
Measurement Measurement and recordng of sewng machne operaton data are stopped.
6
stop swtch
When measurement is being carried out,
When measurement is in the stop status,
Data upload/ The sewng recorder data No. 1 and No. 2 can be uploaded on a medum or downloaded from t,
7
download and can be deleted.
swtch *
Display The sewing recorder screen No. 1 is displayed.
8
changeover swtch
to display the
sewng recorder
screen No. 1
B
A
3
3
sti/min using "@. 2-4. Setting the sewing recorder
Refer to the next tem "#. 3-3 Uploading/downloading the sewing recorder
4
5 6
4 7
8
Descrpton
Lower display : Data No. 2
Lower display : Data No. 2
Setting only data No. 2
to be actve
functions" on the sewng recorder functon settng screen.
is displayed.
is displayed.
– 29 –
on the screen No. 2) s selected.
Settng both
data to be actve
Intal settng : 10 sec
Initial setting : auto
data" for the procedure n detal.