JUKI IP-110 Instruction Manual page 30

Explanation of displayed information and operating switches on the sewing recorder screen No. 1
No. Item to be set
A Sewng recorder graph
display
B Sewng recorder screen No. 1 The sewng recorder data No. 1 s shown on the graph n sold lnes --------.
C Sewng recorder screen No. 2 The sewng recorder data No. 2 s shown on the graph n dotted lnes -----.
D Pitch time display of data in
the screen
Producton volume count-up
1
swtch
Active data selector switch
2
Graphs Nos. 1 and 2 display/
3
non-display changeover
swtch
Right/left scroll switch
4
Latest work data display
5
swtch
Display changeover switch to
6
display the sewing recorder
screen No. 2
Producton volume counter
7
correcton swtch
A graph vertical axis of which represents the number of revolutions of the sewing
machine and horizontal axis of which represents the time is displayed. The ranges
of the vertical and horizontal axes can be set on the sewing recorder screen No. 2.
Pont △ represents the sewng startng pont, thread trmmng pont or the manual-
swtch pressng pont n the data No.1.
Pont ▲ represents the startng and end ponts of the ptch tme of the data No.1.
Pont □ represents the sewng startng pont, thread trmmng pont or the manual-
swtch pressng pont n the data No.2.
Pont ■ represents the startng and end ponts of the ptch tme of the data No.2.
The pitch time of the sewing work in which the last thread trimming, on the current
screen, is performed is displayed.
Upper display : Data No. 1
Lower display : Data No. 2
The producton volume s counted up wth one tem added.
Active data (data to be shifted with switch C or D, data to be additionally recorded
when sewng operaton s carred out, or data whch can be cleared wth Clear
swtch on the screen No. 2) s selected.
Setting only data No. 1 to
be actve :
Graphs No. 1 and No. 2 are respectively changed over between the display and
non-display.
Display :
Data graph that is set to be active is displayed with scrolled to the right or left.
The latest work of the data which is set to be active is displayed in a graph from
the begnnng of sewng.
The sewing recorder screen No. 2 is displayed.
The production volume can be corrected by increasing/decreasing the number
shown on the counter n ncrements of 1.
– 28 –
Descrpton
Setting only data No. 2 to
be actve :
Non-display :
Settng both data to be
actve :