SettNg The Date And TMe - JUKI IP-110 Instruction Manual

<Production support function operation enable/disable setting screen>
Function selector switch 2
Function selector switch 2
4) Select the functon to be used from among the sewng recorder functon, ptch tme montor functon
and production management function and set its display status between the display and non-dis-
play using swtches 3 , 4 and 5 . The screen of the function which is set to the display is displayed
by pressing the switch
It should be noted, however, the work management function screen is displayed only by setting the
operaton of the producton support functon to the enable wth Functon selector swtch 2 because
the nformaton common to all of the functons need to be managed on ths screen.
Swtch 3 : Used to set the sewing recorder function screen to the display/non-display
Swtch 4 : Used to set the pitch time monitor function screen to the display/non-display
Swtch 5 : Used to set the production management function screen to the display/non-display
5) When Enter swtch 6 is pressed, the input settings are confirmed and the date and time setting
screen is displayed.
* If the date and time have already been set, the sewing machine ID setting screen is displayed. If the sewing
machne ID has also been set, the screen s restored to the sewng management nformaton screen No. 2.
When Cancel swtch 7 s pressed, the settngs wll be cleared and the screen wll be restored to
the sewng management nformaton screen No. 2.
(2) Setting the date and time
<Date and time setting screen>
1) Set the current date and tme wth Tme settng swtch 8 . If any date which does not exist on a calendar (such
as the 31st and a leap year) is set, the relevant date will be shown in black-and-white reverse video.
2) When Enter swtch 9 is pressed, the settings are confirmed and the sewing machine ID setting
screen is displayed.
* If the sewing machine ID has already been set, the screen is restored to the sewing management
nformaton screen No. 2.
In the case of the date which does not exist on a calendar (shown in black-and-white reverse
video), the forbidden data alert will sound and the input data cannot be confirmed.
When Cancel swtch !0 s pressed, the settngs wll be cleared and the screen wll be restored to
the sewng management nformaton screen No. 2.
3 4 5
3 4 5
under the normal sewng mode.
Time setting switch 8
Time setting switch 8
– 9 –
Cancel switch 7
Enter switch 7
Cancel switch !0
Enter switch 9