6.
Ensure the cam on the processor socket lock is in the unlocked, counterclockwise position.
Figure 4-16
shows the CPU 1 ZIF socket in the unlocked position.
Figure 4-16 CPU 1 Socket Unlocked
7.
Carefully lower the processor, without the sequencer clamp, onto the processor socket. Align
the pins on the bottom of the heatsink to the slots in the retention frame on the extender
board.
Figure 4-16
8.
Make sure the processor power cable is not pinched underneath the processor before locking
the processor onto the processor extender board.
of the processor power cable.
shows the alignment holes on the processor extender board.
Figure 4-17
shows the correct placement
Removing and Replacing a Processor
49