Parameters; Cpuconfig; Syntax; Operation - HP Integrity rx4640 Service Manual

boottest [test]
boottest [test] [on|off]

Parameters

[test] Each test can be set or cleared:
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example C-5 boottest Command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example C-6 boottest early_cpu off Command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test

cpuconfig

Displays the configuration and deconfiguration state of processors in the server and enables you
to configure or reconfigure processors.

Syntax

cpuconfig <cpu> <on|off>
Parameters
<cpu>
<on|off>

Operation

Issuing cpuconfig with no parameters displays the configuration and deconfiguration status
of all processors. You can reconfigure CPUs by specifying a CPU number and a state (on or off).
Displays status of specific Speedy Boot bit
Sets or clears a specific Speedy Boot bit
Enable/disable system firmware response to BOOTING
bit. If OS Speedy Boot aware set to on.
Enable/disable early CPU selftests.
Enable/disable late CPU selftests.
Enable/disable system board hardware tests.
Enable/disable CEC tests.
Enable/disable EFI driver Core I/O tests.
Enable/disable memory initialization.
Enable/disable full destructive memory tests.
Setting
-------------------------
On (OS speedy boot aware)
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Setting
-------------------------
On (OS speedy boot aware)
Skip this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
specify a processor
state to set the processor to
EFI/POSSE Commands 139