Figure 4-44 Removing and Replacing the Display Board
Replacing the Display Board
To replace the display board, follow these steps:
1.
Gently plug in the midplane riser board cable into the display board.
2.
Hold the display board in position near the chassis and rotate it into the retaining clip until
it clicks into place.
3.
Replace the front cover.
4.
Replace the front bezel.
5.
If rack mounted, slide the server into the rack until it stops.
Rack" (page
"Replacing the Front Cover" (page
"Replacing the Front Bezel" (page
32).
35).
34).
"Inserting the Server into the
Removing and Replacing the Display Board
91