Figure 4-34 Battery Location on the I/O Baseboard
5.
Install the new battery.
NOTE:
6.
installed with the "+" sign facing up.
7.
Replace the I/O baseboard assembly. See
8.
Replace the top cover. See
9.
If rack mounted, slide the server all the way in until it stops. See
the Rack" (page
76
Removing and Replacing Components
The positive terminal of the battery is designated by the "+" sign. The battery is
"Replacing the Top Cover" (page
32).
"Replacing the I/O Baseboard" (page
36).
58).
"Inserting the Server into