Fault Management Overview; Hp-Ux Fault Management; Wbem Indication Providers And Ems Hardware Monitors; Recommended Cleaning Procedures - HP Integrity rx4640 Service Manual

Fault Management Overview

The goal of fault management and monitoring is to increase server availability, by moving from
a reactive fault detection, diagnosis, and repair strategy to a proactive fault detection, diagnosis,
and repair strategy. The objectives are:
• To detect problems automatically, as close as possible to the time of occurrence.
• To diagnose problems automatically, at the time of detection.
• To automatically report (in understandable text) a description of the problem, the likely
cause(s) of the problem, the recommended action(s) to resolve the problem, and detailed
information about the problem.
• To ensure that tools are available to repair or recover from the fault.

HP-UX Fault Management

Proactive fault prediction and notification is provided on HP-UX by SysFaultMgmt WBEM
indication providers, as well as by the Event Management Service (EMS). The Event Management
Service and WBEM provide frameworks for monitoring and reporting events.
SysFaultMgmt WBEM indication providers and the EMS Hardware Monitors enables users to
monitor the operation of a wide variety of hardware products, and alert them immediately if
any failure or other unusual event occurs. By using hardware event monitoring, users can virtually
eliminate undetected hardware failures that could interrupt server operation or cause data loss.
Complete information on installing and using EMS hardware event monitors, as well as a list of
supported hardware, can be found in the EMS Hardware Monitors Users Guide. An electronic copy
of this book is provided on the HP website at http://docs.hp.com/hpux/diag.

WBEM indication providers and EMS Hardware Monitors

Hardware monitors are available to monitor the following components (these monitors are
distributed free on the OE media):
• Chassis/Fans/Environment
• CPU monitor
• UPS monitor
• FC Hub monitor
• FC Switch monitor
• Memory monitor
• Core Electronics Components
• Disk drives
• Ha_disk_array

Recommended Cleaning Procedures

Suggested cleaning procedures for the server are provided in
power to the server when cleaning it.
need cleaning for the server.
Table 5-13 Cleaning
Component
Keyboard
Monitor screen
Table 5-13
Time Frame Procedure
Regularly Dust with damp, lint-free cloth
Regularly Use "HP Video Screen Cleaning Solution" found in 92193M
Master Clean Kit
Table 5-13. Be sure to turn off
details the components and procedures that
Recommended Cleaning Procedures 109