Monarch; Syntax; Parameters; Operation - HP Integrity rx4640 Service Manual

Example C-13 lanaddress Command
LAN Address Information:
LAN Address
-----------------
Mac(00306E4C4F1A)
*Mac(00306E4C0FF2)

monarch

Displays or modifies the ID of the bootstrap processor. The preferred monarch number is stored
in NVM.

Syntax

monarch <cpu>

Parameters

<cpu>

Operation

If specified with no parameters, monarch displays the Monarch processor for the server.
Specifying a processor number alters the preferred Monarch processor. None of these changes
takes affect until after a reboot.
Example C-14 monarch Command
Shell> monarch
Current
Monarch
-------
0
0
To view monarch: fs0 :\ monarch
-----------------+-----------
current status
next boot status |
To set the monarch processor to 1: fs0 :\ monarch 1
-----------------+-----------
current status
next boot status |

pdt

Displays or clears the contents of the page deallocation table.
Syntax
pdt (clear)
Parameters
<clear>
Path
----------------------------------------
Acpi(HWP0002,0)/Pci(3|0)/Mac(00306E4C4F1A))
Acpi(HWP0002,100)/Pci(2|0)/Mac(00306E4C0FF2))
specifies a cpu
Preferred
Monarch Possible Warnings
--------- -----------------
0
0
| Processor
| 0
0
| Processor
| 0
1
clears the pdt
EFI/POSSE Commands 149