Powering Off The Server Manually; Powering On The Server; Powering On The Server Using The Ilo Mp; Powering On The Server Manually - HP Integrity rx4640 Service Manual

Powering Off the Server Manually

To manually power off the server through the power button, follow these steps:
1. Gracefully shut down the operating system. For more information, see
or your operating system documentation.
2. To power off the server, press the power button.
IMPORTANT:
for standby power is still present in the server.
3. Unplug all power cables from the receptacles on the rear panel of the server.

Powering On the Server

Power on the server to full power using the following methods if the server is in the standby
power state:
• iLO MP PC command
• Power button

Powering On the Server Using the iLO MP

NOTE: If the power restore feature is set to Always On through the iLO MP PR command, the
server may automatically power on to the full power state.
To power on the server through the iLO MP, follow these steps:
1. Plug all power cables into the receptacles on the rear panel of the server.
2. Initiate a console session, and access the iLO MP Main Menu.
3. To enable command mode, enter CM.
4. To use the remote power control command, enter PC.
5. To power on the server, enter ON.
6. To confirm the action, enter YES when prompted
7. Start the operating system. For more information, see
operating system documentation.

Powering On the Server Manually

NOTE: If the power restore feature is set to Always On through the iLO MP PR command,
the server may automatically power on to the full power state.
To manually power on the server, follow these steps:
1. Plug all power cables into the receptacles on the rear panel of the server.
2. To start the server, press the power button.
3. Start the operating system. For more information, see
operating system documentation.
30 Powering Off and Powering On the Server
The main DC voltage is now removed from the server; however, AC voltage
Appendix B (page
Appendix B (page 117), or your
Appendix B (page 117), or your
117),