Replacing The Memory Extender Board; Removing And Replacing The Memory Extender Board - HP Integrity rx4640 Service Manual

5. Pull on the extraction levers to unplug the memory extender board from the socket located
on the midplane riser board and remove the memory extender board from the chassis.
Figure 4-7
Figure 4-7 Removing and Replacing the Memory Extender Board

Replacing the Memory Extender Board

To replace the memory extender board, follow these steps:
1. Ensure the extraction levers are positioned in the outward, unlocked position.
2. Align the memory extender board with the front and rear chassis guide slots.
3. Slide the memory extender board in until it begins to seat in the socket located on the
midplane board.
4. Push the extraction levers inward to the locked position in order to plug in the memory
extender board into the midplane riser board.
5. Replace the front cover. See
6. Replace the front bezel. See
7. If rack mounted, slide the server into the rack until it stops. See
the Rack" (page
38 Removing and Replacing Components
shows how to remove the memory extender board from the server.
"Replacing the Front Cover" (page
"Replacing the Front Bezel" (page
32).
35).
34).
"Inserting the Server into