Powering Off The Server; Powering Off The Server Using The Ilo 2 Mp; Powering Off The Server Manually - HP Integrity rx6600 User's & Service Manual

Powering Off and Powering On the Server

Powering Off the Server

Powering Off the Server
Power off the server using the following methods:
• iLO 2 MP PC command
• Power button

Powering Off the Server Using the iLO 2 MP

To power off the server using the iLO 2 MP, follow these steps:
Step 1. Gracefully shut down the operating system.
Step 2. Initiate a console session and access the
Step 3. Enter CM to enable command mode.
Step 4. Enter PC to use the remote power control command.
Step 5. Enter OFF to power off the server, and enter YES when prompted to confirm the action.
IMPORTANT The main dc voltage is now removed from the system; however, ac voltage for
Step 6. Unplug all power cables from the receptacles on the rear panel of the server.

Powering Off the Server Manually

To manually power off the server, follow these steps:
Step 1. Gracefully shut down the operating system.
Step 2. Press the power button to power off the server.
IMPORTANT The main dc voltage is now removed from the system; however, ac voltage for
Step 3. Unplug all power cables from the receptacles on the rear panel of the server.
50
standby power is still present in the server.
standby power is still present in the server.
.
MP Main Menu
Chapter 3