HP NonStop SQL/MX Messages Manual page 605

Utility Messages (20000 through 23099)
SQL 21071
21071 target-table has DELETE triggers enabled.
Where target-table is the three-part ANSI name of the target table for a
FASTCOPY command.
Cause. The target table for an initial FASTCOPY command is non-empty; is the
subject table for a DELETE trigger that is enabled.
Effect. The operation fails; involved objects are left unchanged.
Recovery. Disable DELETE triggers on the target table, retry the FASTCOPY
command, and then enable the triggers again.
SQL 21072
21072 target-table has a SYSKEY column and is the subject
table for a trigger.
Where target-table is the three-part ANSI name of the target table for a
FASTCOPY command.
Cause. The target table for an initial FASTCOPY command has a system defined
SYSKEY column, and is the subject table for one or more triggers. A FASTCOPY
command cannot operate on such a table.
Effect. The operation fails; involved objects are left unchanged.
Recovery. Drop all triggers that have the target table as subject table, retry the
FASTCOPY command, and then re-create the triggers. If necessary, execute queries
that will perform the trigger actions.
SQL 21073
21073 FASTCOPY does not support target tables with names
longer than 122 characters.
Cause. The target table for a FASTCOPY command has an ANSI name part that is
longer than 122 characters. This is not supported by FASTCOPY.
Effect. The operation fails; involved objects are left unchanged.
Recovery. None.
HP NonStop SQL/MX Messages Manual—640324-001
18- 129