HP NonStop SQL/MX Messages Manual page 449

MXCI Messages (15000 through 15999)
SQL 15438
15438 This command does not permit * as the comp-name
component when the membername is present.
Where comp-name is the name of the component.
Cause. An invalid wild card is used on the command.
Effect. The operation fails.
Recovery. Reenter the command again, using a valid component name.
SQL 15451
15451 DS string1 was not found, looked at int1.
Where string1 is the command and object type.
Where int1 is number of data source names searched without finding a match.
Note. As of the ABU SPR, this message is no longer generated.
Cause. You possibly entered the incorrect service or data source name with the
command.
Effect. The operation fails.
Recovery. Enter the correct data source name for the service or database.
SQL 15452
15452 Command not supported in this release, string1.
Where string1 is the command and object type.
Cause. The command is not available.
Effect. The operation fails.
Recovery. No recovery required.
SQL 15453
15453 Unknown object type, string1.
Where string1 is the object type.
Cause. The object type is invalid.
Effect. The operation fails.
HP NonStop SQL/MX Messages Manual—640324-001
15 -61