HP NonStop SQL/MX Messages Manual page 411

MXCI Messages (15000 through 15999)
SQL 15263
15263 Single quote at start of component name not permitted,
command had: 'string1'.
quotes when needed to prevent upcasing.
are not identifiers and should not be quoted at all.
Where string1 is the component name enclosed in single quotes.
Cause. The component name is enclosed in single quotes.
Effect. The operation fails.
Recovery. Enter the command without the single quotes around component name.
SQL 15264
15264 string1 name component is not an SQL identifier, can
not be double quoted, command had: "string2".
Where string1 is the object type.
Where string2 is the failing component name.
Cause. The component name is not an SQL identifier.
Effect. The operation fails.
Recovery. Enter the command with the correct component name for an SQL identifier.
SQL 15265
15265 fname name component is not valid, command had:
string1. +++SUGG: Last component of name may be missing, or
double quotes on component name are missing.
Where fname is the file name.
Where string1 is the name component as entered.
Cause. The component name is not valid.
Effect. The operation fails.
Recovery. Enter the command with the correct component name for the command
issued.
HP NonStop SQL/MX Messages Manual—640324-001
+++SUGG: Identifiers use double
Some name components
15 -23