HP NonStop SQL/MX Messages Manual page 600

Utility Messages (20000 through 23099)
SQL 21056
21056 Index index is offline.
Where index is the three-part ANSI name of the source or target index of the
FASTCOPY INDEX command.
Cause. The FASTCOPY INDEX command is executed and the source or target index
is offline.
Effect. The fastcopy operation fails. The availability of source and target indexes and
their tables is not affected.
Recovery. Make the above indicated index, index, online using the appropriate utility
command, before retrying the fastcopy operation.
SQL 21057
21057 Cannot FASTCOPY to table target-table because it is
being referenced by another table.
Where target-table is the three-part ANSI name of the target table of a
FASTCOPY command.
Cause. A FASTCOPY command is executed for a non-empty target table or target
index and the REFERENTIAL INTEGRITY (RI) constraint on another table references
the target table.
Effect. The fastcopy operation fails. The target table and its indexes are available to
other operations.
Recovery. Remove the RI constraint and retry, if required.
SQL 21058
21058 Data copy failed for the FASTCOPY of source-object into
target-object.
Where source-object is the three-part ANSI name of a source table or index for a
FASTCOPY command.
target-object is the three-part ANSI name of a target table or index for a
FASTCOPY command.
Cause. An error occurred during the data copy part of the fastcopy operation. The
accompanying error messages provide the details.
Effect. The FASTCOPY operation fails; target objects are left in an incomplete state.
Recovery. Use the RECOVER operation to either CANCEL or RESUME the fastcopy
operation depending on the actual error.
HP NonStop SQL/MX Messages Manual—640324-001
18- 124