HP NonStop SQL/MX Messages Manual page 594

Utility Messages (20000 through 23099)
SQL 20821
20821 Constraint constraint is disabled.
Where constraint is the name of the constraint.
Cause. MXTOOL VERIFY found a constraint that is disabled.
Effect. This is an informational message.
Recovery. Contact your service provider to enable the constraint.
SQL 20822
20822 The DML privileges in the file label do not match the
privileges defined in the metadata.
Cause. An inconsistency was found during the VERIFY operation.
Effect. None. This is an informational message.
Recovery. Contact your service provider.
SQL 20850
20850 Audit bit was not changed for file file-name. Already
set to the correct value of value.
Where file-name is the Guardian file-name of the SQL/MX object.
Where value is either a 0 or 1. A 0 indicates the file is not currently audited, and a 1
indicates the file is currently audited.
Cause. The "-a" option was used with the FIXUP utility to change the audit bit on an
SQL/MX file to the currently set value.
Effect. None. This is a warning.
Recovery. No recovery is necessary.
SQL 20852
20852 Broken bit was not changed for file file-name. Already
set to the correct value of value.
Where file-name is the Guardian file-name of the SQL/MX object.
Where value is always 0 to indicate the broken bit is already cleared.
Cause. The '-rb" option was used with the FIXUP utility to reset the broken bit on a file
where the broken bit is not currently set.
HP NonStop SQL/MX Messages Manual—640324-001
18- 118