Table of Contents
Advertisement
Utility Messages (20000 through 23099)
SQL 21068
21068 The FASTCOPY of target-object has been canceled.
Where target-object is the three-part ANSI name of a target table or index for a
FASTCOPY or RECOVER...RESUME command.
Cause. The RECOVER...CANCEL operation is in progress for the target object.
Effect. The operation fails; involved objects are left unchanged.
Recovery. None.
SQL 21069
21069 FASTCOPY already is in progress for target-table.
Where target-table is the three-part ANSI name of the target table for a
FASTCOPY command.
Cause. A FASTCOPY command uses INDEXES IMPLICIT. However, a fastcopy
operation is already initiated for the target table or one of its indexes.
Effect. The operation fails; involved objects are left unchanged.
Recovery. None.
SQL 21070
21070 source-object has been modified since the initial
FASTCOPY was started.
Where source-object is the three-part ANSI name of the source object for a
FASTCOPY command.
Cause. The FASTCOPY is a continuation of a previous command and the source
object is modified because the previous command was issued.
Effect. The entire fastcopy operation is canceled. Involved target objects are left
empty and available.
Recovery. Initiate a new fastcopy operation.
HP NonStop SQL/MX Messages Manual—640324-001
18- 128
Hide quick links:
Advertisement
Table of Contents
