HP NonStop SQL/MX Messages Manual page 456

MXCI Messages (15000 through 15999)
SQL 15518
15518 The value must be between 1 and 32767for LINE_SPACING
option.
Cause. The value that you specified for the LINE_SPACING option was not in the
valid range.
Effect. The operation fails.
Recovery. Specify the correct LINE_SPACING value and resubmit.
SQL 15519
15519 The current PAGE_LENGTH length1 value is insufficient
for the report. The PAGE_LENGTH should be length2.
Cause. The current page length specified was not large enough to allow printing of
one detail plus the currently defined titles, footings, headings, and so forth.
Effect. No report is generated.
Recovery. Specify a new page length that is equal to or greater than the value
displayed in the error message, or revise the report definition so that the report will fit
within the given page length.
SQL 15520
15520 The column value value is not in the DETAIL list. All
TOTAL and SUBTOTAL items must be in the DETAIL list.
Cause. One of the columns in the TOTAL or SUBTOTAL command is not present in
the current DETAIL command print list.
Effect. The operation fails.
Recovery. Revise the TOTAL, SUBTOTAL, or DETAIL command so that all of the
TOTAL items also appear in the DETAIL print list.
SQL 15521
15521 You have a SUBTOTAL command but not a BREAK command.
The SUBTOTAL command is being ignored.
Cause. You specified a SUBTOTAL command, but there are no break columns to
subtotal.
Effect. The operation fails.
HP NonStop SQL/MX Messages Manual—640324-001
15 -68