Power Heat Duct - FireplaceXtrordinair 44 DV XXL EF Manual

Optional Equipment
5 0

POWER HEAT DUCT

The optional heat duct allows the fireplace to transfer heat to separate locations in the home. One or two
ducts may be used . Installation should take place prior to installing drywall.
Warning: This kit must be installed as specified in these instructions. Do not modify any component.
Warning: Use of any external blower other than the Travis Power Heat Duct Blower will void the warranty and
listing of this appliance and may create a fire hazard.
Note: The power heat duct must be installed by a qualified service technician.
Note: Some building codes
may require the use of
firestop spacers
whenever the duct
passes from room to
room.
Note: When routing ducts
through a cold area
(e.g. crawl space) we
recommend insulating
the duct with fiberglass
insulation. If paper-
backed insulation is
used, the paper can not
contact the duct.
1 Determine the route for the heat duct using the illustration below as a guide.
Travis Industries
(part # 98500769)
Junction Box
Rheostat
(with cover plate)
Use 10" x 3-1/4"
wall stack (duct)
when passing
through tight
areas.
Grill
4050114
(for qualified installers only)
Maximum Duct
Length = 20'
Wall Adapter
(for use on
2 x 4 walls)
Floor
Boot
Blower
Box
Duct Adapter
(6" Round to 10" x 3-1/4")
6" Duct
Starter Ring
Heat Duct
Electrical
Wiring
Electrical
Source
1 0 0 - 0 1 1 4 9