Clearances; Vertical Standoff - FireplaceXtrordinair 44 DV XXL EF Manual

Built-in direct vent fireplace
Hide thumbs Also See for 44 DV XXL EF:
Table of Contents

Advertisement

Installation
1 0

Clearances

When installed, walls in front of the fireplace must be a minimum 3-1/2" to the side of the faceplate.
Due to the high temperature, the heater should be located out of traffic and away from furniture and draperies.
Fireplace must be placed so the vents below and above the glass do not become blocked

Vertical Standoff

The vertical standoff above the fireplace must be erected prior to installation. See the illustration below for
instructions.
The vertical standoff is
shipped swiveled down.
Rotate the standoff
upwards into place.
Secure the standoff
with the six screws.
1/4" Nutdriver
Travis Industries
(for qualified installers only)
4050114
These lifting
handles may be
removed once
the fireplace is
in place.
7/16" Wrench
Nail or screw the
fireplace to the
floor through the
holes on these
brackets.
1 0 0 - 0 1 1 4 9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents