Vent Requirements; Altitude Considerations; Clearances; Part Numbers (8" Dia. Pipe) - FireplaceXtrordinair 44 DV XXL EF Manual

Installation
1 4

Vent Requirements

! The vent must maintain the required clearance to combustible materials to prevent a fire (see "Clearances"
below). Do not fill air spaces with insulation.
! The gas appliance and vent system must be vented directly to the outside of the building, and never be
attached to a chimney serving a separate solid fuel or gas-burning appliance. Each direct vent gas appliance
must use it's own separate vent system.

Altitude Considerations

This heater has been tested at altitudes ranging from sea level to 8,000 feet (2,400 M). In this testing we have found that
the heater, with its standard orifice, burns correctly with just an air shutter adjustment.
! Failure to adjust the air shutter properly may lead to improper combustion which can create a safety hazard. Consult your
dealer or installer if you suspect an improperly adjusted air shutter.

Clearances

Horizontal Runs
Travis Industries
(for qualified installers only)
Min. 3" Clearance Above 45°
Sloping Vent after first firestop
(5-1/2" before first firestop)
4050114
Min. 1" Clearance to the
Sides & Below the Vent
(before or after the firestop)
1 0 0 - 0 1 1 4 9