Fireplace Placement Requirements; Clearances; Raised Fireplaces - FireplaceXtrordinair 564 GSR2 25K Deluxe Installation Manual

14

Fireplace Placement Requirements


Fireplace must be installed on a level surface capable of supporting the fireplace and vent

Fireplace must be placed directly on wood or non-combustible surface (not on linoleum or carpet)

This heater may be placed in a bedroom. Please be aware of the large amount of heat this appliance
produces when determining a location.

Clearances


The fireplace requires a 1/2" (13mm) clearance from the sides and back of the fireplace to the framing
members. No material (insulation, framing, etc.) may be placed into this area.
NOTE: Drywall (or other combustible) may contact the first ½" of the sides of the fireplace.

When installed, walls in front of the fireplace must be a minimum 1" (25mm) to the side of the
fireplace.

Due to the high temperature, the heater should be located out of traffic and away from furniture and
draperies.

Fireplace must be placed so the vents below and above the glass do not become blocked.

Raised Fireplaces


The fireplace (and hearth, if desired) may be placed on a platform designed to support the fireplace
(155 Lbs.70 Kg) and vent.

The base of the fireplace must be a minimum 70" (1778mm) below the room ceiling.
© Travis Industries
Installation
3/5/2019 - 1491
(for qualified installers only)
IDB01093
564 GSR2 25K