Real-Time Monitoring - Q-See QC40198 User Manual

WEB OPERATION
Section1
Section 2

7.2.1 Real-time Monitoring

In section 2, left click the channel you want to view, you can see the corresponding video in current window.
On the top left corner, you can view device IP, channel number, network monitor bit stream.
On the top right corner, there are six function buttons. See
1: Digital zoom: Click this button and then left click and drag the mouse in the zone to zoom in. right clicking
mouse restores original status.
2: Change show mode: resize or switch to full screen mode.
3: Local record. When you click local record button, the system begins recording and this button becomes
highlighted. You can go to system folder RecordDownload to view the recorded file.
4: Capture picture. You can take snap shots of important video. All images are stored in system client folder
\download\picture (default).
5: Audio: Turn audio on or off. (It has no relationship with system audio setup )
6: Close video.
Section 5
Figure 7-18
Figure 7-19
Figure 7-20.
X434H 434H434H
Figure 7-20
QC40198/QC40196 User Manual
Section 3
Section 4