Sub Menu-Time Set; Hard Disk Setup - Q-See Q25DVR4ES User Manual

Chapter 5: DVR Setup -
TIME SET
∨ ∨ ∨ ∨
2008/08/08 20:08:08
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
Chapter 5: DVR Setup -

HARD DISK SETUP

OVERWRITE ENABLED
HDD SIZE
HDD USED
HDD FORMAT
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HDD FORMAT:
If you format the hard drive, it will erase all the data on the hard drive.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive.
Q-See Q25DVR4ES User's Manual
[YES]
120042MB
80865MB 77%
Page 13

5.12 Sub Menu-Time Set

To configure the DVR's time:
Press [ Up] and [ Down] to move
prompt.
Press [ Select] to modify.
Press [ Menu] to save and exit.
5.13 Hard Disk Setup
OVERWRITE ENABLED:
If you choose YES, recording continues and
overwrites previous recordings when the hard
drive is full. If you choose NO, the recording
process stops when the hard drive is full.
HDD SIZE: This shows the size of the hard
drive installed in the DVR.
HDD USED: This shows the space used up
on the master hard drive and the percentage
of hard drive space being used.