Related Manuals for Q-See qr404-411
Summary of Contents for Q-See qr404-411
-
Page 1: Quick Installation Guide
Quick Installation Guide 4 Channel H.264 Compression DVR with (CIF) Real-Time Recording and 4 Color CMOS Camera Kits... -
Page 2: Part 1 - Package Contents
Q-SEE QUICK INSTALLATION GUIDE PART 1 - PACKAGE CONTENTS: 4 - Color CMOS Cameras with Stands User’s (4) QSM1424C (6mm Lens) Pre-Installed (4) QSM1424W (3.6mm Lens) QR404 DVR Manual Hard Drive Power Supply & BNC (M) - RCA (F) Camera Cables... - Page 3 Q-SEE QUICK INSTALLATION GUIDE PART 2 - DVR CAMERA AND POWER CONNECTIONS Please note that it is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.
- Page 4 Q-SEE QUICK INSTALLATION GUIDE PART 4 - CONNECTING THE DVR TO YOUR TV 1. Plug the BNC to RCA adapter in to Video Out port then connect the RCA cable (not included) to the DVR. 2. Connect the other end of the RCA cable to the Video Input on the TV if you are using a television screen.
-
Page 5: Part 5 - Dvr Controls: Front Panel
Q-SEE QUICK INSTALLATION GUIDE PART 5 - DVR CONTROLS: FRONT PANEL Item Button Name Symbol Function Number POWER INDICATOR If the “Green” Indicator Light is on, the System is Getting Power IR Receiver Receives Signal from Remote Control When the “Red” Indicator Light Flashes, it Means the Hard Drive is Being Read or Written to... - Page 6 Q-SEE QUICK INSTALLATION GUIDE PART 6 - ACCESSING THE DVR MENUS Choose MENU by right clicking on the mouse or by pushing the MENU button on the DVR front panel or remote control. The Main Menu offers the following Setup Features: CAMERA: Setup name display, position, image view, and record quality of each channel (cameras).
-
Page 7: Part 8 - To Start Recording
Q-SEE QUICK INSTALLATION GUIDE PART 8 - TO START RECORDING This System offers 3 modes for recording: 1. Manual 2. Time Schedule 3. Motion Detection. From the main menu, select RECORD to enter into the Record Setup menu (shown at right). - Page 8 Q-SEE QUICK INSTALLATION GUIDE Motion Detection Recording: From the Record Setup screen, set the Rec Mode to “TIME SCHEDULE RECORD” and click “SCHEDULE” in green. This will display the Schedule menu (See picture above). The options are: All, CH-1, CH-2, CH-3, and CH-4 respectively. The channel you select will be highlighted in “Blue”, and the unselected channels will be “Grey.
- Page 9 Q-SEE QUICK INSTALLATION GUIDE PART 9 - SETTING UP THE DVR TO PLAYBACK Searched Playback: From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If you input a specific date and click Search, you will find all the recordings for that day. When you select an item, you will playback the recordings in 4 channel mode;...
- Page 10 Q-SEE QUICK INSTALLATION GUIDE Questions or Comments? Contact Us: Mailing Address: Customer Service: DPS, Inc. Phone: 877-998-3440 x 538 8015 E. Crystal Dr. Email: cs@dpsi-usa.com Anaheim, CA 92807 Live Chat from our Website Website: Tech Support: http://www.q-see.com Phone: 877-998-3440 x 539 Fax: Email: ts@dpsi-usa.com...