6: Motion Detect; 8: System Function; 1: Time Set - Q-See QR40198 User Manual

DVR MENU

5.2.7.6: Motion Detect

(Picture 57)
(Picture 58)

5.2.8: System Function

(Picture 59)
(Picture 60)
Clicking on the MOTION icon in the Device Management interface
(Picture 32) will allow you to configure your Motion Detection settings.
Once you click on the icon a pop up MOTION DETECTION Setup
interface as illustrated in Picture 57 will appear and you will be able to
configure the various settings directly through here.
detection] Menu has three sections, including Channel Status, Sensitivity
and Motion area.
Channel STATUS: This option allow you enable motion detection on any
channel.
SENSITIVITY: This option allows you to set sensitivity level of motion
detection from 1 to 4 with 4 being the most sensitive.
MD AREA: This option allows you select the area you want to be
sensitive to motion. The area is separated into a 13*10 grid as depicted
in Picture 58. When any object moves into the area you have
designated to protect, recording will be triggered.
which areas to protect by clicking on the individual squares of the grid (as
illustrated by the red blocks chosen in Picture 58). Motion triggered
recording will not occur in the area outside of the chosen grid (as
illustrated by the semi-transparent blocks in Picture 58).
The Main Menu interface (Picture 4) allows you to access the System
Setup menu by clicking on the System icon. The System Setup menu
(Picture 59) gives you access to these sub-menus to configure their
settings individually: Time Set, User Password, Audio/Video Setting,
Language select, System Info and System Maintenance.

5.2.8.1: Time Set

Click the [Main menuSystemDate/Time] in turn to Enter into the time
setup menu shown as Picture 60. In the Time Setup menu, you can
modify your system date and time; set the date/time and time zone
format, and enable daylight savings time.
29 | P a g e
QR40198 User Manual
The [Motion
You can choose