Keypad Tone; Time Set; Event List - Q-See QSD371614C4-250 User Manual

you choose OFF, the account information will be kept when you logout of the system.

6.5.5 Keypad Tone

Set the keypad tone to "ON" or "OFF" to enable or disable keypad tone during operation.

6.5.6 Time Set

You can adjust the current time, date and year at any time by region. Set your region first
and set the current time so that the video back-up data can be played with the correct time
panel or remote control and then press "SELECT" button to change the numeric value. Once
you finish setting the time, press "MENU" button. Then press "DOWN" key and "SELECT"
button to apply the new time set. Or move the mouse to move the cursor up and down, use
the left mouse click button to change the numeric value. Once you finish time setting, use
the right mouse button to return. Then move the mouse to "Apply" and left click to apply the
new time set.

6.5.7 Event List

Operation Manual-4CH Duplex DVR
displayed.
Date and Time format are below.
*** 2008/08/08 － year/month/day
*** 01:01:00 － hour: minute: second
To move the cursor on the screen, use
"UP" and "DOWN" key on the DVR front
The Event list function enables playback
by event. On the Event list menu, it shows
all past recorded video, start time and end
time of each recorded video, showing
recording year/date/time in list. The HDD
can store 300 events in it at most. If the
events are over 300 items, user can play
19