5.8.2 Set time
2008/11/11
(
) MOVE
(SEL)SELECT
5.8.3 Hidden Channel
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
PTZ SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
VGA SETUP
(
) MOVE
5.8.4 Audio port setup
AUDIO PORT SETUP
AUDIO PORT1-VIDEO CHANNEL
AUDIO PORT1-RECORD
(
) MOVE
SET TIME
17:50:01
(MENU) EXIT
[
4 ]
[CH4]
[OFF]
800X600 60HZ
(SEL)SELECT
(MENU) EXIT
[
1 ]
[ ON ]
(SEL)SELECT
(MENU) EXIT
You can change year /date /hour / minute / second by
using the SET TIME menu.
2007/11/11=year/month/day 17:50:01=hour/minute
/second .Use the REW and FWD buttons on the front
panel to move the cursor below the numbers right and
left. Then use the "SELECT" button to change the
numeric values of date & time.
In the example,selecting "HIDDEN CHANNEL"[4],
it means camera 4 is hidden and you can not preview
the picture of channel 4 but can record its picture on
HDD
[Note] when you enable the hidden channel function
you just can not preview the picture of the hidden
channel, you can still record on the channel.
When you move the cursor to "AUDIO
PORT-RECORD" and push the "SELECT" button the
option will be changed to OFF or ON .If the option is
ON the audio will be recorded into the hard drive when
you push the RECORD button.
When you move the cursor to "AUDIO PORT VIDEO
CHANNEL" and push "select" button, the option will
be changed to "2". If you push "SELECT" button one
more time the option will be changed to "3" and once
more will change the channel to "4".
10