Q-See QC40198 User Manual page 113

WEB OPERATION
Parameter Function
Tour
PTZ
Activation
Capture
Copy
Save
Refresh
PTZ
PTZ interface is shown in
Please note, before operation make sure you have set speed dome address, and combo DVR and speed dome
connections are OK.
Display the selected video in local monitor window.
Tour interval and tour mode are set in combo DVR local menu
(chapter 5.3.9 Display )
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
You need to input capture channel number so that system can backup
motion detection snapshot file.
This is a shortcut menu button. You can copy current channel setup to
one or more (all) channels.
You can click save button after you complete setup for one channel, or
you can complete the whole setup and then click save button.
Click this button to get device's latest configuration information.
Figure 7-53
X470H470H470H
QC40198/QC40196 User Manual
Figure 7-53