• Remote internet monitoring (up to 10 users at the same time) • Mobile Phone Surveillance • Compatible with MAC and PC • Free Q-See Apps for iPhone, iPad, and Android remote viewing! • Receive instant email alerts and snapshot images when motion is detected...
Product Set-up • Designed for Do It Yourself setup. • Comes with everything needed to setup except router for remote access. • Connect cameras to power supply with splitter and DVR, connect DVR to power supply, connect both power supplies to surge protector and power outlet.
Page 4
Product ease of use • Easy DIY setup of cameras and DVR • Easy to use menu interface • Mouse and remote included for easy menu navigation • UPnP enabled for easier IP address and port forwarding setup...
Page 5
Where product should be used • Product can be used anywhere security is needed, homes, offices, factories, banks, retail stores, parks, playgrounds, etc.
What’s in the Box 1- QS458 DVR 1- Pre-installed AV Rated 500GB Hard Drive 1- 12V Power Adapter for DVR 8- QSM1424W Cameras 8- 60ft Video/Power Cables for Cameras 1- 8 Way Power Splitter for Cameras 1- USB Mouse 1- Remote Control 1- BNC/RCA Video Cable 1- Ethernet Cable for DVR...
Page 7
Product Set-up • Connect BNC/RCA cable to DVR and TV (can also connect to 19” inch or larger VGA monitor cable not included) • Connect Mouse to USB port on back of DVR (can also use remote control) • Connect 12V adapter to DVR •...
Page 9
Product spec-DVR2. Power Supply - 110-220 Volt input, 12 Volt 2A output Power Consumption – 7 Watt (w/o hard drive) Alarm – None Alarm Mode – Motion Detection USB ports – 1 USB 1.1, 1 for mouse, 1 USB 2.0 for USB backup (Flash, Hard Drive) Network Interface –...
Page 10
Product spec-QSM1424W Camera Weather proof Indoor/Outdoor IP63 rating. Mounting Bracket - 3 axis Resolution – 400TVL Sensor – 1/4 in CMOS color Lens: 3.6mm (50° to 55° Field of View) Night Vision - 24 LEDs up to 40 feet AGC/BLC - Auto S/N Ratio - >48dB Power Consumption - <3 Watts (LEDs on) Power Supply –...
Page 11
Question: I am not getting any audio from my cameras, Why? Answer: The cameras that come with the package do not have built in microphones. If you want to hear audio from the camera you would need to run a powered microphone from the camera location and connect it to an audio in port on the back of the DVR.