Q-See QC40198 User Manual page 102

WEB OPERATION
Please refer to the following chart for detailed information.
Parameter
Channel
Pre-record
Setup
Copy
Save
Refresh
Figure 7-42
Function
Select a channel first.
Input pre-record value here.
System can record three to five seconds of video before activating
the record operation into the file. (Depends on data size).
In Figure 7-29 , click set button, you can go to the corresponding
X458H458H458H X
setup interface.
Please set schedule period and then select corresponding record
or snapshot type: schedule/snapshot, motion detection/snapshot,
and alarm/snapshot.
Please select date (Current setup applies to current day by default.
You can put a checkmark before the week to apply the setup to the
whole week.)
After complete setup, please go back to
save to save current time period setup.
This is a shortcut menu button. You can copy current channel setup
to one or more (all) channels. The interface is shown in
You can click save button after you complete setup for one channel,
or you can complete the whole setup and then click save button.
Click this button to get device's latest configuration information.
QC40198/QC40196 User Manual
and then click
X459H 459H 459H
X460H 460H460H
.