Alarm; Detect - Q-See QC40198 User Manual

MAIN MENU
Email
The email interface is shown below. See Figure 5-21.
SMTP server: Input your email SMTP server IP here.
Port: Input corresponding port value here.
User name: Input the user name to login the sender email box.
Password: Input the corresponding password here.
Sender: Input sender email box here.
Title: Input email subject here. System supports letters and numbers. Max 32-digit.
Receiver: Input receiver email address here. System supports up to 3 email boxes.
SSL enable: System supports SSL encryption box.
Interval: The send interval ranges from 0 to 3600 seconds. 0 means there is no interval.
Please note system will not send out the email immediately when the alarm occurs. When the alarm, motion
detection or the abnormality event activates the email, system sends out the email according to the interval you
specify here. This function is very useful when there are too many emails activated by the abnormality events, which
may result in heavy load for the email server.

5.3.6 Alarm

Please refer to Chapter 4.6 Alarm Setup and Activation.

5.3.7 Detect

Please refer to Chapter 4.5 Detect.
QC40198/QC40196 User Manual
Figure 5-21