Q-See QC40198 User Manual page 120

WEB OPERATION
Abnormality
The abnormality interface is shown below. See Figure 7-61.
Please refer to the following chart for detailed information.
Parameter Function
Event
Type
Normal
Out
Latch
Send
email
Alarm
upload
Show
message
Figure 7-61
The abnormal events include: no disk, no space, disk error, net error.
You need to put a checkmark to enable this function.(Multiple choices)
The corresponding alarm activates output channel when alarm occurs,
There are three channels.
The alarm output can delay for the specified time after alarm stops.
Then system disables alarm and corresponding activation output.
The value ranges from 10s to 300s.
If you enable this function, system can send out email to alert the
specified user.
System can upload the alarm signal to the network (including the alarm
centre.)
System can display alarm information in local combo DVR screen.
QC40198/QC40196 User Manual