Q-See QC40198 User Manual page 125

WEB OPERATION
Click alarm function, you will see the interface shown in
Here you can set device alarm type and alarm sound setup.
Please refer to the following chart for detailed information.
Please make sure current device can upload the alarm.
Type
Alarm
Type
Operation Listen alarm
Figure 7-68
Parameter Function
Video loss System sends alarm when video loss occurs.
Motion detection System sends alarm when motion detection alarm
occurs,
Disk full System sends alarm when disk is full.
Disk error System sends alarm when disk error occurs.
Camera System sends alarm when camera is viciously
masking masked.
Encode alarm System sends alarm when peripheral device
alarms.
External alarm Alarm input device sends out alarm.
System notifies web when alarm occurs (you select
from the above event type), and then web can
notify user.
Video When alarm occurs, system auto enables video
monitor. This function only applies to video
detection alarm (motion detection, video loss and
camera masking).
Prompt Automatically displays alarm dialogue box.
Sound pop up System sends out alarm sound when alarm occurs.
You can specify as you wish.
Path Here you can specify alarm sound file.
QC40198/QC40196 User Manual
Figure 7-68.
X483H 483H483H