Preset Setup; Activate Preset; Patrol Setup; Activate Patrol - Q-See QC40198 User Manual

AUXILIARY MENU

6.3.1 Preset Setup

Note: The following setups are usually operated in
In Figure 6-2 , use eight direction arrows to adjust camera to the proper position.
X408H408H408H X
In Figure 6-5 , click preset button and input preset number. The interface is shown in
X409H409H409H X
Add this preset to one patrol number

6.3.2 Activate Preset

In Figure 6-6 please input preset number in the blank, and click preset button.
X411H411H411H X

6.3.3 Patrol Setup

In Figure 6-5 , click patrol button. The interface is shown in
X412H412H412H X
Input preset number and then add this preset to one patrol.

6.3.4 Activate Patrol

In Figure 6-6 , input patrol number in the blank and click patrol button
X414H414H414H X

6.3.5 Pattern Setup

In Figure 6-5 , click pattern button and then click begin button. The interface shows like
X415H415H415H X
Please go to Figure 6-2
X417H 417H 417H
You can store all these setups as pattern 1.
to modify zoom, focus, and iris. Go back to
X
QC40198/QC40196 User Manual
Figure 6-6
X
Figure 6-2 , Figure 6-5
X405H 405H 405H X X406H 406H 406H
Figure 6-7
X
Figure 6-8 .
X413H 413H 413H X
Figure 6-8
X
Figure 6-9
X418H418H418H
and Figure 6-6 .
X X407H 407H 407H X
Figure 6-7 .
X410H 410H 410H X
Figure 6-9 .
X416H 416H 416H X
and click end button.
X