Q-See QC40198 User Manual page 117

WEB OPERATION
Please refer to the following chart for detailed information.
Parameter
Alarm output
Activate
Refresh
Record
Record control interface is shown in
Please refer to the following chart for detailed information.
Parameter
Schedule
Manual
Stop
Operation here is the same to chapter 4.2 Manual Record. Please refer to chapter 4.2 for detailed
information
Function
There are three output channels (Multiple choices).
Enable/disable alarm output device. After the Web activated the
alarm, you need to cancel the channel and then click the trigger
button to cancel the alarm, or you need to cancel the alarm in the
pop-up dialogue box in local-end.
Search alarm output status.
Figure 7-57.
X474H 474H 474H
Figure 7-57
Function
System enables auto record function you setup in record schedule.
Enable corresponding channel to record no matter what period
applied in the record setup.
Stop current channel record no matter what period applied in the
record setup.
QC40198/QC40196 User Manual