Configure Stop; Save Configuration - Fluke NORMA 4000 Operator's Manual

Configure Stop

You can select different stop conditions:
Column
Trig Remote
time
key
ti-int
at -Date-
after -time-
Menu Integration Setup, second field column Trig marker.
Press Enter, select stop condition and confirm with Enter.
Stop condition is now set. If you have selected a time to start (time) enter the
time in the column at. Proceed as described below:
Menu Integration Setup, first field column at is highlighted.
Press Enter, select year, month, day, hour minute and seconds with the cursors
and press Enter to confirm.
Stop time is now set. If you have an integration time window selected (ti-int)
proceed as follow:
Menu Integration Setup, second field column after is highlighted.
Press Enter, select time with the cursors and confirm with Enter.
Stop time is now set.
Save the configuration settings by pressing the SAVE function key.

Save Configuration

A configuration menu is displayed on the screen.
1. Press function key SAVE.
A list showing all existing configurations is displayed.
2. Select a configuration (for example, 10:USER) and press Enter to confirm.
The configuration is now being saved with the new name. The name of the new
configuration, 10:USER, is displayed in the menu item. W2 configurations are
marked as User2.
At the next startup of the device, the last saved and loaded configuration is applied by
default.
Settings
Stop via Interface command
Stop at date and time
Stop when key pressed (Key F2)
Stop after time window
Stop on date and time (only active at Trig time)
Integrations time window in sec. (only active at Trig ti-int)

Save Configuration

Description
7
Configuration
7-23