You can configure and display up to nine variables (values). To change the
user defined display size, see the next section.
Change User-Defined Display Size
You can change the size of the numeric display in the user defined screen. You can select
between three sizes:
Size
3
6
9
Press function key 3/6/9.
User defined values are shown in desired size.
The changing of the display size is done in a loop, every time you press the
function key 3/6/9.
You can change the size in the configuration menu and also in the
measurement menu.
Save User Defined Screen
Save the configuration settings by pressing the SAVE function key.
See details about saving a configuration in section "Save Configuration" in Chapter 7.
Back to Common Numeric Screen
Press function keys Back... or Esc
The recently used numeric screen is shown.
Note
three numeric values, double size
six numeric values, common size (7 mm)
nine numeric values, with size 5 mm
Note
Measure Voltage, Current and Power
Description
8
Measuring Process
esn045.gif
8-15