Measure Voltage, Current And Power; Measured Values For Individual Channels; View The Values Of One Channel; View Detailed Values Of One Channel - Fluke NORMA 4000 Operator's Manual

NORMA 4000/5000
Operators Manual

Measure Voltage, Current and Power

Measured Values for Individual Channels

The description that follows is for a W3 configuration. The W2
configuration is basically the same with some differences. In W2, some
values are invalid and are suppressed. The phase voltage does not exist and
is replaced by the phase-to-phase voltage, reactive power, and apparent
power and are available as totals only.

View the Values of One Channel

After switching on the Power Analyzer, the display shows the numerical values measured
in channel 1.
U
1 rms
I
1 rms
P
1
S
1
Q
1
λ
1
Press measuring keys 1 through n to view the values of the respective channels.

View Detailed Values of One Channel

You have the option to view detailed data regarding the measured values of a channel.
Details regarding the voltage values for channel 2 are shown in the following example.
8-4
Display
rms voltage value
rms current value
Real power
Apparent power
Reactive power
Power factor lambda (capacity or inductance)
1. Press measuring keys 1...n to view the measured values of the respective channel.
2. Press function key Detail.
Note
Description
esn030.gif