Contacts and Settings
•
This setting is available only when "OFF" is
selected for "Static NAT" (Page 112) and
"ON" is selected for "Gatekeeper".
Making Static NAT Settings
Note
•
To change the static NAT settings, it is
necessary to configure system settings,
including the port number settings. For details,
contact your dealer.
•
These settings can only be made in IP mode
(Page 108).
•
This setting is available only when "IP
Address" is set to "Manual" in "Network
Settings" (Page 91).
1.
Login to the administrator menu (Page 105).
•
The admin menu screen is displayed.
2.
Press [
].
•
The second page is displayed.
3.
Use [
][
] to select "Static NAT Settings" and
press [Enter].
•
The Static NAT settings screen is displayed.
4.
Use [
][
] to select the following items for input:
"Static NAT": Use [
"OFF" (default).
Note
•
To select "ON", "H.460" must be set to
"OFF" on the H.323 settings screen
(Page 111).
112
User Manual
][
] to select "ON" or
•
When "ON" is selected, the IP address of
the WAN side will be displayed for the unit
information on the Home screen (Page 30).
"WAN IP Address": Enter the WAN IP address of
the router.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"RTP and RTCP for Audio": Enter the initial port
number (5100–5194) for RTP and RTCP for Audio
(default: 5100).
"RTP and RTCP for Video": Enter the initial port
number (5200–5294) for RTP and RTCP for Video
(default: 5200).
"Camera Control": Enter the initial port number
(5300–5394) for controlling a video camera (default:
5300).
"SIP (2-Point)": Enter the port number for 2-party
video conference calls (5000–5099) for
communication using a SIP server (default: 5060).
Note
•
If the port number is changed, the IP
address and the changed port number (IP
address: port number) will be displayed for
the unit information on the Home screen
(Page 30).
"SIP (Multi-Point)": Enter the port number for
multiple-party video conference calls (55000–
55099) for communication using a SIP server
(default: 55060).
Note
•
This setting cannot be changed when
"SIP" is set to "OFF" on the call type
settings screen (Page 109).
"H.245": Enter the initial port number for H.245
(5500–5595) (default: 5500).
Note
•
This setting cannot be changed when "H.
323" is set to "OFF" on the call type settings
screen (Page 109).
•
For the following items, a number will be
automatically added to the initial port
number that you enter. The total number
indicates the range and values of available
port numbers for the items.