When To Use Selectype; Selectype - Epson EPL-N2000 Reference Manual

When to Use SelecType

In general, use SelecType only for settings you cannot make in
your software, including the following:
Changing the emulation modes and selecting the IES
(Intelligent Emulation Switching) mode
Specifying the channel and configuring the interface
Choosing the size of the memory buffer used to receive data
You should keep in mind the following points when using
SelecType settings:
A number of SelecType settings can also be made using the
OneTouch modes, printer driver, and Remote Control
Panel utility.
Application programs may send commands to the printer
that override SelecType settings. If you are not getting the
results you expect, check your application software settings.
To see the current SelecType settings, print a status sheet.
A map of all available SelecType menus is included in
Appendix E.
5-2

SelecType