Using Other Emulation Modes; Changing Emulation Modes - Epson EPL-N2000 Reference Manual

Using Other Emulation Modes

Your printer is designed to work best in its LJ4 emulation
mode. If you want to use an emulation other than LJ4, you can
select ESC/P 2, FX, I239X, or GL/2 emulation mode.
Match the emulation mode in the Emulation Menu with
drivers or print data already formatted for EPSON LQ or FX
series printers, or IBM printers. The available emulation modes
are LJ4 (default), GL2, I239X, ESC/P 2, and FX.
The printer's intelligent emulation switching (IES) feature
automatically switches between emulation modes, depending
on the received data. To enable intelligent emulation switching,
select Auto on the Emulation Menu using the printer driver
[confirm], the Remote Control Panel utility, or the SelecType
mode.

Changing emulation modes

To change the printer emulation mode, follow these steps.
1. Press Menu to enter SelecType.
2. Press Menu several times until EMULATION MENU appears
on the display.
3. Press Item to select the interface you want to configure.
4. Press Value to select the emulation mode. When your
desired emulation appears, press Enter. An asterisk (*)
appears at the right of the display.
If you need to make more SelecType changes, continue to read
the following section. If not, press On Line. The printer goes
back to on line status, as indicated by the On Line light.
5-23
SelecType